OMG Low Profile Digital Steering Servo - D2-18S
Specification:
- OMG-LP-18DF
- OPERATING VOLTAGE: 4.8-7.4V
- Fastest speed: four-wheel-drive drift car special slow rudder
- Blocking torque: 7.4V-18kg-cm
- OUTPUT GEAR: 25T
- Size: 41x20.5x30 mm
- Weight: 49g
- Operating travel: 180±10 degrees (500-2500 sec)
- Direction of rotation: 180 degrees (1000-2000 sec)
- Angle limit: 220
- Midpoint: 1520 sec
- Maximum travel: ≈180 degrees (500-2500 sec)
- Pulse width range: 500-2500 sec
- Dead pulse width: 2 sec
- Wire length: JR180 mm
- Wire Model: #22PVC
About remote control transmitter gyroscope adjustment: (About gyro EPA on the transmitter side) For a larger rudder angle when drifting, as well as a faster initialization speed, set the travel volume of the third channel on your transmitter to 110-120 At the same time, the gyro gain (sensibility) is set to 70%-90%. Some remote controls may not support channel travel settings.
In case of the deep angle while at drifting or the quick initiate action, please set value of 3ch EPA on your transceiver as 110-120, then gyro gain as 70%-90% at the same time. the set gain can't sometimes be changed by the transmitter you're using.